Colt .22 Rimfire SAA
blue or nickel finish, 5 ½ in. and 7 ½ in. barrels, manufactured in two distinct runs, slightly less than 100 converted from unsold .44 RF still in inventory in the late 1880s, and approximately 20 mfg. new in 1891.
Colt Non-Factory Engraved SAAs
Next steps
Colt Non-Factory Engraved SAAs for Sale
Colt Non-Factory Engraved SAAs
Palmetto State Armory
Colt Non-Factory Engraved SAAs
GrabAGun
Colt Non-Factory Engraved SAAs
Guns.com
Colt Non-Factory Engraved SAAs
Sportsman's Warehouse
Colt Non-Factory Engraved SAAs
EuroOptic.com
Colt Non-Factory Engraved SAAs
Bereli
Colt Non-Factory Engraved SAAs
Firearms Depot
Colt Non-Factory Engraved SAAs
GunsAmerica
Colt Non-Factory Engraved SAAs
GritrSports
Colt Non-Factory Engraved SAAs
Brownells.com
Colt Non-Factory Engraved SAAs
KYGUNCO
Colt Non-Factory Engraved SAAs
GUNS.COM
Colt Non-Factory Engraved SAAs Price & Value
Comprehensive Pricing Information for the Colt Non-Factory Engraved SAAs
In this article, we provide a detailed analysis of the current market prices and trends for the Colt Non-Factory Engraved SAAs. We've gathered data on new and used prices, fluctuations over the past year, and demand trends to help you make an informed decision when purchasing or selling this firearm. Please note that variations in caliber, barrel length, generations, and sub-models may affect the item's price, so make sure your search is specific enough to obtain the correct value.
Factors Affecting Pricing:
Several factors can influence the value of a Colt Non-Factory Engraved SAAs:
Caliber: Different calibers can affect the firearm's price, as some calibers may be more popular or harder to find. Barrel Length: The length of the barrel can impact the firearm's price, as certain lengths may be more desirable or practical for specific purposes. Generations: Different generations of the firearm may have improvements or changes that could affect the value. Sub-models: Specific sub-models or variations, such as limited editions or unique features, can also impact the firearm's value.
Conclusion:
As you consider purchasing or selling a Colt Non-Factory Engraved SAAs, it's essential to stay informed about the current market prices and trends. Keep in mind that factors such as condition, caliber, barrel length, generations, and sub-models can all affect the firearm's value. By understanding the market dynamics, you can make a more informed decision and ensure you're getting the best possible price.
Colt Non-Factory Engraved SAAs Description
value depends on when and where the engraving was done. Early "New York" or "dealer" engraved Single Actions done outside the factory were usually shipped from Colt in the "soft" and w/o finish. The majority of these were done in the 1870s or 1880s, and condition being equal, are generally priced at 50% to 80% of factory engraved original specimens if the guns were shipped in the "white" to one of Colt's distributors. 1st Generation guns are attributed to L.D. Nimschke and were manufactured in N.Y. either under contract from the Colt Company or one of the large N.Y. retailers will bring up to 50% more than a standard N.Y. engraved gun. Later guns, well done by a known contemporary artist, are usually priced by adding the value of the gun to the cost of the engraving. Poor execution may actually lower the value of a plain, but original gun, much as refinishing would. The notation of "soft" in the factory records is desirable, since the large wholesalers in the northeast used many of the same engravers as Colt. There are and have been some 20th century engravers who stand out, however, and their work commands higher prices, e.g. Lynton McKenzie, Ben Lane, Leonard Francolini, Mike Dubber, Howard Dove, Cole Agee, Weldon Bledsoe, and David W. Harris - the three latter being famous for their "cattle brand" style of engraving, and Ben Lane for his meticulous duplication of the patterns of Cuno Helfricht, the most famous of all Colt factory engravers.
Colt Non-Factory Engraved SAAs Features
The value depends on when and where the engraving was done.
Early "New York" or "dealer" engraved Single Actions done outside the factory were usually shipped from Colt in the "soft" and without finish.
The majority of these were done in the 1870s or 1880s, and condition being equal, are generally priced at 50% to 80% of factory engraved original specimens if the guns were shipped in the "white" to one of Colt's distributors.
1st Generation guns are attributed to L.D. Nimschke and were manufactured in New York either under contract from the Colt Company or one of the large New York retailers will bring up to 50% more than a standard New York engraved gun.
Later guns, well done by a known contemporary artist, are usually priced by adding the value of the gun to the cost of the engraving.
Poor execution may actually lower the value of a plain, but original gun, much as refinishing would.
The notation of "soft" in the factory records is desirable, since the large wholesalers in the northeast used many of the same engravers as Colt.
There are and have been some 20th-century engravers who stand out, however, and their work commands higher prices, for example, Lynton McKenzie, Ben Lane, Leonard Francolini, Mike Dubber, Howard Dove, Cole Agee, Weldon Bledsoe, and David W. Harris - the three latter being famous for their "cattle brand" style of engraving, and Ben Lane for his meticulous duplication of the patterns of Cuno Helfricht, the most famous of all Colt factory engravers.
Colt Non-Factory Engraved SAAs Specs
Firearm Type
Revolver
Caliber
--
Action Type(s)
Single Action
Frame Material(s)
--
Frame Finish
--
Barrel Length(s) (in.)
--
Barrel Profile
--
Muzzles
--
Capacity(s)
--
Trigger(s)
--
Sights
--
Safety(s)
--
Overall Length(s) (in.)
--
Weight(s)
--
Year From - Year To
--
SKU
--
UPC
--
Patterned After
--
Colt Non-Factory Engraved SAAs Consumer Reviews
0
Based on 0 review
1
0%
2
0%
3
0%
4
0%
5
0%
There are no reviews yet
Be the first to leave a review.
Similar Models to Colt Non-Factory Engraved SAAs
COLT SINGLE ACTION ARMY (SAA) - NON-STANDARD MFG.
between 1873-1940, Colt mfg. approx. 320,000 Commercial SAA revolvers. There were several distinct types or configurations of SAAs that varied from the standard and therefore, have special significance to the collector.
Colt London Agency SAA
as with percussion revolvers and derringers, Colt shipped Single Action Army revolvers to England for sale through its London Agency. John Kopec, co-author of A Study of the Colt Single Action Army Revolver, estimates that 18% of p...
Colt Flat-Top Target Bisley SAA
a target version similar to the flat-top target Single Action with adj. sights. Available in all standard calibers with a 7 ½ in. barrel, blue finish and either walnut or rubber grips. Offered from 1894 to 1912, the most popular caliber wa...
Colt Etched Panel .44-40 SAA
the most desirable of all Commercial black powder era SAAs, this variant has the words "Colt Frontier Six Shooter" acid etched in a panel on the left side of the barrel. This marking was the result of a request in January 1878 by ...
Colt .44 Rimfire SAA
.44 Henry rimfire cal., 7 ½ in. barrel, blue and nickel finishes, most were shipped to the southwest and saw hard use, rare with any original finish remaining, many barrels shortened during their period of use, serial numbered in their own...
Colt Factory Engraved SAAs
slightly less than 1% (approximately 3,400) Single Actions are thought to have been engraved at the factory or elsewhere by authority from Colt between 1873 and 1940. Between 1873-circa 1929 Colt offered three basic grades of engraving with...
Colt Buntline Special Model SAA
.45 LC cal., long barrel model named after Ned Buntline, author of dime novels in the late 19th century. Only 28 believed to be mfg. with folding adjustable rear sight and extended hammer screw for attachment of nickel-plated metal skeleton...